The 10x3 Traditional Pent Tool Store from the Treetops Traditional range. This 10x3 tool shed model is fully clad (no windows) with quality Deal Redwood 12mm PAR finished (16mm nominal) tongued and grooved (T&G) shiplap cladding, that enhances both the quality and appearance of the building. Internally, the building benefits from chamfered (rounded) edges upon the corners of the 44 x 27mm framing, in keeping with the high standard of construction throughout. For security this product is fully clad, thus light and access can only be provided by the gable end located 1.46m high x 0.757m (2'6") wide single door, securable be the provision of a key lock. As an upgrade in lieu of the single door, a 1.32m (4'2") wide double door can be fitted to the low side section, leaving both gable ends fully clad. Self-assembly by customer (instructions supplied). NB: Please be aware that this traditional pent tool store unit has a maximum height of 1.70m (5'7"), thus less headroom than a typical shed. Manufacturers advise that the building will require re-treating with 6 weeks of delivery/installation and annually thereafter with a quality wood preservative. Approximately 1 foot/300mm should be left around the entire building to aid air flow around the building and access to re-treat.
Only one door is included with this tool store shed unless the double door option is selected under options and choices.
Please note - This product has a 3 inch roof overhang on either side. This isn't included in the external size listed in the detailed specification.